Wall Mount and UnderBar Dispensers

Set Descending Direction

6 Items

per page
Set Descending Direction

6 Items

per page

Wall mount and Under Bar Dispensers

Wall mount and under bar mount beer towers are a practical and stylish solution for any draft beer dispensing setup. These dispensers come in both air and glycol cooled configurations and are easy to install. A wall mount beer tap dispenser installs into a wall and the lines are tapped from the other side. These are available as pipe wall mount beer tap system or a box wall mount beer tap dispenser with a hanging drip tray. In addition, we sell built-in glass rinsers on the beer tap drip tray. An underbar or under counter dispenser is similar but is mounted with the screws on top of the dispenser and goes under a bar or a counter. This helps in keeping the counter space open while giving easy access for pouring beer.

Air cooled wall mount beer tap systems are typically installed onto a walk-in cooler so that it’s air can flow through the dispenser and keep all the lines cold. It can also be installed on different walls in the bar if cold air can be pumped into the dispenser. Air cooled under bar beer dispensers have similar needs for cold air to be pumped in.

Glycol cooled wall mount and under counter beer dispenser are used in commercial draft beer tap system setups. These come with stainless-steel beer lines along with copper glycol lines that keep the cold block and all the lines at a consistent cool temperature. These can be used for long run commercial beer tap systems. An insulated beer trunk line ensures that the beverage stays cold up to the dispenser. Glycol is circulated in the tower in copper lines. Complete setup inside the dispenser is insulated by three layers of insulation ensuring minimum energy loss and no condensation.

Draftwarehouse carries these wall mount towers in multiple configurations and sizes. Our 6, 8, 10 and 12 product wall mounts and underbar beer tap systems are the most popular.