McDantim Trumix® Triple Output Gas Blender

$1,599.00 USD

  • Default Blend- 

  • Custom Blends: Each blender is built to order to suit your needs. Specify the blend if different than above in the notes below.

  • Connections: Two Inlet Gas Lines (CO2 & N2), Mixed Gas Outlet Line per blend.

  • Fittings: The panel comes with 3/8" Barb fittings. Different size fittings are available at no extra cost.  Specify size in notes below: 1/4", 5/16", 3/8" barbs and 1/4" female NPT.

  • Does not operate if either supply gas fails or becomes empty.

  • Maintains accuracy of +/- 2% of full scale or better within the flow range of .4 to 40 liters per minute (.85 to 85 cubic feet per hour).

  • Inlet Pressures: Blender tuned in-house with minimum required inlet pressure. Standard pressures are 55 and 70 psi, but can be customized for your system. Maximum inlet working pressure of 150 psi.

  • Outlet Pressures: Adjustable outlet pressure of 0-60 psi per blend. The maximum outlet pressure will always be 10 psi lower than the minimum inlet pressure.

Specify blend ratio and fitting sizes below if different than the standard ones mentioned above:

 

 

* Shipping: Typically ships in 5-7 business days
* Eligible for Free Shipping Program

Description

SKU: MB300
Availability: In Stock Pre order Out of stock
Description

McDantim Trumix® blenders mix CO2 and N2 on demand and are best used for long draw draft systems or on some stouts like Guinness and other drinks where a blended gas might be needed to dispense. The Trumix® Single blender comes preset with your custom blends to best fit your system. The panel mounts easily on the wall, and is simple to install. With the Trumix® Single HP blender, customization of the blends give you endless options and the flexibility to expand your draft beer selection. You could include low CO2 content nitrogenated beers, high CO2 content German Style beers, and domestic drafts on one system without the need for additional premixed cylinders.

Specifications
  • Size: 9.5″ wide (including mounting flanges x 10″ high x 4.5″ deep
  • Accuracy and Flow Range: Maintains accuracy of +/- 2% of full scale or better within the flow range of .4 to 40 liters per minute (.85 to 85 cubic feet per hour).
    Standard Flow Capacity: 

At 55 psi minimum inlet pressure, up to 12 kegs/hour per blend. 
At 70 psi minimum inlet pressure, up to 16 kegs/hour per blend. 
At 110 psi minimum inlet pressure, up to 26 kegs/hour per blend.

  • Inlet Pressures: Blender tuned in house with minimum required inlet pressure. Standard pressures are 55 and 70 psi, but can be customized for your system. Maximum inlet working pressure of 150 psi. Includes upgraded metal body Inlet Regulators with a maximum safe pressure up to 325 psi.
  • Outlet Pressures: Adjustable outlet pressure of 0-60 psi per blend. The maximum outlet pressure will always be 10 psi lower than the minimum inlet pressure.
Documents
Download the file    Installation Instruction

Download the file    Dimensional Drawing